One of the more distinctive systems found on some Wayne Dalton garage doors is the TorqueMaster spring system.
Unlike a traditional torsion spring that is visibly mounted above the garage door, TorqueMaster springs are housed inside a tube. This can make a broken spring less obvious to a homeowner.
What Is a Wayne Dalton TorqueMaster System?
The spring system helps counterbalance the weight of the garage door.
With a TorqueMaster configuration, the springs are contained inside a tube positioned above the door.
Because they’re enclosed, you may not be able to visually identify a broken spring as easily as you could with an exposed torsion spring.
Sign 1: Your Garage Door Suddenly Feels Extremely Heavy
A properly functioning spring system carries much of the effective weight of the garage door. If a spring fails, the door may suddenly become very difficult to lift.
This is one of the strongest indications that the spring system needs inspection.
Sign 2: The Garage Door Opener Struggles
Your automatic opener shouldn’t have to lift an unbalanced garage door by itself.
If the opener suddenly struggles, stops, or only raises the door a short distance, the spring system may be responsible.
Don’t repeatedly operate the opener in an attempt to force the door upward.
Sign 3: The Door Only Opens Partway
A garage door that previously opened normally but suddenly stops after moving a short distance may have a spring or balance problem.
Other causes are possible, so diagnosis is important.
Sign 4: The Garage Door Is Uneven
If one side of the door moves differently from the other, there may be an issue involving the spring system, cables, or other lifting components.
An unstable or crooked door should not be forced.
Why Can’t I See a Broken Spring?
This is what makes TorqueMaster troubleshooting different.
The spring is enclosed within the tube, so you can’t necessarily look above the garage door and see the familiar gap associated with a broken exposed torsion spring.
Can TorqueMaster Springs Be Repaired or Replaced?
The available solution depends on the specific Wayne Dalton system, door configuration, and condition of the components.
The system should first be identified and inspected.
Can TorqueMaster Be Converted to Torsion Springs?
In some situations, conversion to a conventional torsion spring system may be considered. Whether that is appropriate depends on the garage door and installation.
It isn’t a decision that should be made without evaluating the complete system.
Wayne Dalton TorqueMaster Repair in Queens, NY
If your Wayne Dalton garage door suddenly became heavy, won’t open, or your opener is struggling, the TorqueMaster spring system may need attention.
For Wayne Dalton TorqueMaster spring repair and garage door service in Queens, NY, contact us today at 718-755-5985.